UNIProbe is an advanced car scanner and engine diagnostic tool designed for professional automotive workshops. It works as a powerful multi brand scanner and multi brand diagnostic scanner, helping technicians diagnose electrical, electronic, and engine-related issues across a wide range of vehicles.
This all-in-one automotive scan tool integrates six diagnostic instruments into a single unit, including a four-channel oscilloscope for accurate measurement of voltage signals and current clamps. It allows precise fault detection in modern vehicle systems, making it a reliable engine scanner for complex diagnostics.
UNIProbe supports battery testing, starting and charging system analysis, and CAN network diagnostics. The built-in multimeter enables quick measurement of voltage and resistance, while an external electronic sensor allows accurate fuel pressure testing. These capabilities make it an essential automotive scanner for both routine servicing and advanced troubleshooting.
The device also includes a signal generator that simulates PWM signals from sensors and control units. This is especially useful for testing solenoids, common-rail pressure regulators, and other actuators, making UNIProbe ideal for advanced diagnostics and chiptuning applications.
Powered by Measurement System Software (MSS) and integrated with the IDC5 diagnostic platform, UNIProbe offers smooth navigation and fast access to diagnostic functions. The intelligent SIV (Signal Information Viewing) feature compares live signals with stored reference data, instantly identifying abnormal values and reducing diagnostic time.
Technical Specifications
| POWER SUPPLY | TRIGGER |
| 8 – 32 VDC | source CH1, CH2, CH3, CH4, selectable, trigger delay |
| INTERNAL BATTERY RECHARGE VOLTAGE | DISPLAY MODE |
| 10 – 32 VDC, built-in 7.4 V, 1Ah lithium battery | Normal, Auto, Single shot |
| BATTERY AUTONOMY | MEASUREMENT OF FOLLOWING VALUES |
| up to 5 hours | frequency, period, RMS, Vmax, Vmin |
| MAXIMUM CURRENT DRAW | |
| 1,2 A at 12 V | MULTIMETER: |
| ENVIRONMENTAL | GALVANIC INSULATION |
| Operating temperature: 0 ÷ +45°C | up to 1 kV for safe measurements |
| Storage temperature: – 20 °C ÷ 60 °C | VOLTAGE MEASUREMENTS |
| Operating relative humidity: 10 % ÷ 80 % without condensation | Maximum measurable voltage: ± 400VDC, input impedance 4.7 MΩ, 3 digit resolution; three value ranges, with automatic or manual scale selection: 0-6 V, 6-60 V, 60-400 V AC/DC |
| DIMENSIONS | RESISTANCE MEASUREMENTS |
| 155x178x55 mm (excluding Bluetooth antenna) | Three value ranges, with automatic or manual scale selection: 0-1000 Ω, 1-100 kΩ, 100 – 10 MΩ, resolution: 3 digits |
| WEIGHT | CURRENT MEASUREMENTS |
| 1,2 kg | Current measurements performed by connecting TEXA “BICOR” series probes to the jacks on the front of the tool |
| TNET FUNCTION | |
| OSCILLOSCOPE: | Troubleshooting on CAN ISO11898, ISO11519 networks |
| CHANNELS | BPP FUNCTION |
| 4 independent input channels with analogue bandwidth of 10 MHz (-3 dB); sampling rate 20MSamples/sec at 10 bit with 1 or 2 channels active, 10 MSamples/sec at 10 bit with 3 or 4 channels active | Troubleshooting on starting systems Voltage measurements: DC up to 50VDC |
| MAX INPUT VOLTAGE | ELECTROMAGNETIC COMPATIBILITY |
| 50 Vmax, AC or DC couplingbr | ETSI EN 301 489-17 V 1.2.1 EN 6/326/1 |
| VERTICAL SCALE FOR EACH CHANNEL | HORIZONTAL SCALE |
| from 20 mV/Div to 50 V/Div | from 500 ns/Div to 5s/Div |
Reviews
There are no reviews yet.